Showing posts with label diy. Show all posts
Showing posts with label diy. Show all posts

Wednesday, May 6, 2015

Graduation!

Three years of endless school and I'm finally graduating from Texas State! Wahoo! 

With graduating comes many responsibilities. However, one of the minuscule and more exciting aspects of graduating is decorating my graduation cap! And luckily for you, I may have documented my progress. 

I started by browsing Pinterest and it's variety of graduation caps. I didn't find anything that I really enjoyed so I switched my focus to looking at quotes. I stumbled upon this ever famous quote.


The teacher in me decided to switch it up and change the verbage slightly, "Teach the change you wish to see." I didn't think I could fit the "in the world part" so I wanted to add the Earth in the cap somehow. 

My final graduation cap! 


So here's how I accomplished this:

I bought black glittered scrapbook paper from Hobby Lobby to use as the base for my grad cap. I traced the cap onto the paper and cut it out so it would fit atop the cap. I then had to cut a hole for the tassel-part of the cap. 



After this, I needed to cut out a circle for the Earth part of the design. I had initially planned to use my Silhouette Cameo to cut out a circle but I was feeling a bit lazy and changed my planned. Instead I used my fishbowl and traced a circle onto a piece of cardstock. 


Once again I cut out a center circle for the tassel and then drew my design on the piece of cardstock. 


I covered all "ocean" areas with Modge Podge before sprinkling it with glitter. I placed the paper underneath the circle in order to attempt to collect the excess glitter in order to place it back in the container. 


I repeated this process with the "land" pieces of the Earth. While I waited for the "Earth" to dry, I hot glued the black glitter paper to my cap. 


(Sorry for the low quality photo here!)

I put the Earth in it's place on the cap and positioned the letters until I was happy with their position. The letters were just scrapbook stickers I bought from Hobby Lobby. For this quote, I only needed one package of stickers! 


I then added different details to the cap. I love Disney and Mickey Mouse so I purchased these small gem stickers from Hobby Lobby and used them to frame the quote. I also bought school related scrapbook stickers and placed them on the corners of the cap. 

I really wanted a bow on my cap so I created the one you see in the picture! 

Once I was happy with the placement of everything, I glued down the "Earth" piece first. I then glued down the letters, the gems, the bow and stickers. I used hot glue for everything. 


I am SO happy with how it turned out and I cannot wait for graduation!

Tuesday, December 30, 2014

Final Big/Little Reveal Post

Well, two months later and I'm finally going to finishing posting about my final big/little reveal crafts. Better late than never (;



I bought chipboard letters of "G", "P", and "B." I painted both the "G" and the "B" the same shade of pink while I painted the "P" a lighter shade of pink. I wrote "Gamma", "Phi", and "Beta" on the corresponding letters. 


I bought this jar from Hobby Lobby and filled it up with lollipops to represent the "Lollipop Guild" from Wizard of Oz. I used my Silhouette Cameo to create the Gamma Phi decal to place on the lid. I also used my Cameo to cut the tag that I tied around the jar as well. 


Not exactly a craft but I figured I'd mention this anyways! I bought her a candle from Yankee Candle along with a pocketbac and pocketbac holder from Bath and Body Works. I just wrapped them in cellophane and placed it in her basket! 


This letter was actually really easy to paint. The pattern is essentially just a bunch of dots! I began with my base coat. I chose a blue-grayish color. 


To begin making the above pattern, I started by creating a "flower"-esque shape. I began with the center dot and then evenly spaced four dots around it. This will become the center of your shape. 


After creating the center, I added dots in the spaces between the previously made center shape. I tried to make this second row of dots slightly above the ones made prior. 

I continued adding dots in this manner: placing them in between the dots made in the previous layer until I reached the desired size of the shape. 


Once again, here's the end result! On the back of the letter I wrote a small note to my little! 


Here's the entire finished basket! I bought the basket at Hobby Lobby, by the way! I also found "Toto" there as well. Pure luck I guess! I also added a few Gamma Phi tshirts to her basket to begin her collection. 


Now I've finally finished sharing all my crafts from Big/Little reveal! 

Sunday, November 30, 2014

'Tis the Season


I know I haven't finished all of my Big/Little Reveal posts yet, but I just had to share my project from today! 

I was told over the weekend that I should make a Christmas-themed wreath for our door to keep our sorority house festive. Of course, my roommates selected me to do the hard work and I immediately logged into Pinterest and began browsing. I ended up stumbling upon a Christmas Tree shaped deco mesh wreath! 
              Image via: Pinterest.com

Now, even though I saw this wreath I really had no clue how to accomplish it. I originally planned to do a snowman wreath but somehow came across the tree instead. 

Usually, I'm a Hobby Lobby kind of girl but since it was Sunday I had to go to other craft stores and spent hours looking for materials. My trip proved even more difficult because I wasn't sure what kind of work wreath I needed to create this tree! 

I eventually gave up searching for the unknown and got creative. I found the wire easels typically used for floral arrangements in the floral section of my craft store and figured I could make it work. In case you don't know what I'm talking about, here's a reference: 
Image via: http://www.mteden.com/catalog.aspx?subcat=50120&mastcat=Funeral

They had the cone shape I was looking for and I assumed with some patience and wire I could make my own wreath form. 


After messing with it for a brief amount of time, I was able to secure the middle wire of the easel by wrapping wire around it. I used pliers and wire cutters from my dad's toolbox for this disassembly. 



I then began to add wire rows to the easel to create my work wreath. This step was fairly simple and didn't take as much time as I thought. 

Next, I added pipe cleaners where I thought necessary. At this point, I was hopeful that my tree would come out the way I imagined. All I did next was form the wreath. I started by working from top to bottom. I did the left column, then the right column, and finally the middle column. 


Once I had finished these steps, I realized I had a few gaps between the columns. I added more pipe cleaners to the wreath form and continued forming my wreath. 

I didn't take pictures of my next steps, but the rest of the wreath was pretty easy! 

I created my bow "tree topper" by following the instructions on Kristen's Creations. (http://kristenscreationsonline.blogspot.com/2009/11/how-to-make-tree-topper.html?m=1) I've used this tutorial multiple times and it's the best explanation that I've ever seen. 

I affixed my tree topper using a pipe cleaner that I attached to the deco mesh. 

My next steps involved a lot of hot glue but I didn't really have a method in which I added the beads and ornaments. Usually when I make wreaths I just kind of wing it. I don't plan much when it comes to what is being placed on the wreath. 

I first added the beads, hoping it would help me space out my ornaments. The ornaments were sporadically placed. Primarily, I just didn't want to have too many empty spots on the wreath. I also didn't want to have too many things on it either. 

Overall, I'm really happy when the way this came out! Especially since I didn't have a cone/tree work wreath! 


Let the holiday festivities begin!